Name: China CONELE Mining Material Blender Manufacturers Suppliers Factory - Co-Nele Intelligent Equipment
Brand: CO-NELE
SKU: 314694601

CONELE Mining Material Blender Positioning

Precise Batching · Material-adaptive · Steady Uniform Output

The CONELE Mining Material Blender is a precise blending unit for the front end of mining material handling, focused on "dosed right, fed steady, blended even." It integrates batching, feeding, and blending into one machine, dosing accurately by set ratio and blending uniformly-so downstream backfilling, beneficiation, or recovery starts from a reliable material basis. It is the front-end hub of continuous mining production.

Mixing-process Value

The ceiling of blending quality is often set by batching and feeding precision. Wrong ratio or uneven feed can't be fully rescued by strong agitation. The mining material blender puts "precise batching" and "even feeding" at the blending stage itself, locking recipe accuracy at the source, cutting segregation, deviation, and rework, and providing stable, trustworthy material input for the whole process chain.

CONELE Mining Material Blender Core Features

Precise Batching

Doses accurately by set ratio, ensuring recipe execution with stable, controllable output proportions.

Multi-form Blending

Handles powder, granule, and slurry forms-broadly fitting mining blending needs.

Steady Uniform Output

Delivers blended material continuously and evenly, smoothly linking downstream processes.

Wear-resistant & Durable

Wear-resistant alloy cast-iron blades and liners resist abrasion; patented self-tensioning aids reliability.

Application Processes

Suitable for backfill batching blending, beneficiation feeding blending, tailings mixing, and multi-form material handling in mining-covering one-stop blending of powder, granule, and slurry forms, providing a stable material basis for backfilling, beneficiation, and recovery.

Safety & Compliance

The unit adopts mining-safe design, is certified with the CMAC mining-product safety mark, and uses MA-system certified core parts-meeting mining safety standards from batching to blending, safeguarding operation qualification and personnel/equipment safety.

FAQ

Q:What are key parts that need regular cleaning for underground mixer?

A:Mixing blades, mixing arms, discharge door sealing surfaces, shaft end sealing assemblies. Underground dust and concrete residue easily accumulate. Use high‑pressure water washing after shutdown; remove material residue to prevent material caking which causes jamming on next startup

Q: Mixing uniformity is poor, material segregation occurs. What should I check?

A:Main causes: overloading feeding; worn mixing blades leading to big blade‑liner gap and extra resistance; poor underground ventilation causing heat accumulation; unstable power supply voltage. Solutions: reduce single‑batch feeding volume; inspect & replace worn wear parts; improve site ventilation; check power supply.

Q: Abnormal loud noise appears during mixer running underground.

A:Stop machine immediately for inspection. Possible causes: stones jam between blade and liner; bearing damage; loose mixing‑arm bolts; gearbox lack of lubrication oil. Remove jamming stones; tighten bolts; replace damaged bearing; replenish gearbox lubricant oilCO-NELE

Q:How to reduce wear of underground mixer in high‑abrasive mine material?

A:1) Adopt CO‑NELE high‑chromium wear‑resistant alloy blades and liners;

2) Keep proper gap between blade and liner (≤6 mm);

3) Avoid feeding oversized aggregate;

4) Check bolt fastening status every week to prevent loose wear‑partsCO-NELE

Hot Tags: conele mining material blender, China conele mining material blender manufacturers, suppliers, factory