1. Concrete and Cement-Based Materials Research
This is the most common application scenario, as twin horizontal shaft mixers closely simulate the working principle of industrial concrete mixers (widely used in commercial concrete plants), ensuring experimental results are representative of actual production.
Formula optimization for standard mortars/concretes:
Used to prepare small batches of mortar (e.g., cement-sand ratio tests) or concrete samples. Researchers adjust the proportions of components (cement, sand, aggregates, water, admixtures like superplasticizers, air-entraining agents) to study their effects on material performance:
Workability: Testing fluidity (slump, 扩展度), water retention, and segregation resistance.
Mechanical properties: Evaluating compressive strength, flexural strength, and elastic modulus of cured samples.
Durability: Assessing impermeability, frost resistance, and carbonation resistance.
R&D of advanced cement-based materials:
Critical for developing high-performance concrete (HPC), ultra-high-performance concrete (UHPC), self-healing concrete, or fiber-reinforced concrete (FRC). For example:
Optimizing the dosage of steel fibers or synthetic fibers in FRC to balance workability and toughness.
Testing the dispersion effect of nano-additives (e.g., nano-silica) in cement paste, where uniform mixing (achieved by twin shafts) directly affects mechanical enhancement.
2. Road Engineering Materials Testing
In road construction, twin horizontal shaft laboratory mixers are used to develop and validate formulas for base/subbase materials and asphalt mixtures (assisted by specialized equipment).
Cement-stabilized aggregates:
Preparing samples of cement-stabilized gravel or sand to test the influence of cement content, moisture content, and gradation on compressive strength, splitting strength, and shrinkage performance. This helps determine the optimal mix ratio for road bases.
Modified asphalt mixtures:
Assisting in mixing asphalt with additives (e.g., polymers, rubber powder) or alternative aggregates (e.g., recycled concrete aggregates). The mixer ensures uniform coating of asphalt on aggregates, which is critical for testing high-temperature stability and low-temperature crack resistance of the mixture.

3. Chemical and Fine Chemical Industries
Twin horizontal shaft mixers are suitable for mixing high-viscosity materials or multi-phase systems (powders + liquids, solids + pastes) in laboratory-scale formulation development.
Coatings, inks, and adhesives:
Testing the mixing effect of pigments, fillers, resins, and solvents. For example:
Optimizing the dispersion of titanium dioxide in water-based coatings to ensure color uniformity and hiding power.
Studying the influence of mixing time on the viscosity and bonding strength of epoxy adhesives.
Polymer composites:
Mixing polymer matrices (e.g., PVC, PP) with reinforcing fillers (e.g., glass fibers, carbon black) to evaluate how filler distribution affects mechanical properties (tensile strength, impact resistance) of the composite.
4. Environmental Protection and Solid Waste Utilization
In research on recycling industrial solid wastes (e.g., fly ash, slag, steel slag) as building materials, twin horizontal shaft mixers ensure uniform mixing of waste residues with cementitious materials, enabling reliable performance testing.
Waste-derived construction materials:
For example, developing bricks or blocks using municipal solid waste incineration ash. The mixer helps determine the maximum allowable dosage of ash while maintaining compressive strength and durability of the product.
Soil improvement:
Mixing solidified agents (e.g., cement, lime) with soft soil to test the effect of different dosages on soil bearing capacity and permeability, supporting the design of foundation reinforcement schemes.
5. Ceramic and Refractory Materials
In the development of ceramic slurries or refractory mixes (e.g., castables), the mixer ensures uniform dispersion of ceramic powders, binders, and additives, which directly affects the sintering performance and mechanical strength of the final product.
Refractory castables:
Testing the mixing ratio of alumina powder, silica fume, and water to optimize flowability (for easy casting) and high-temperature strength (after firing).
