News

Precautions During The Operation Of Dry Powder Mixer

Jun 21, 2025 Leave a message

Single Shaft Dry Mortar Mixer

Before Starting:

Check whether the power supply connection is secure and whether the control system is functioning normally.

Inspect the mixer tank, agitator, and transmission components for any damage, looseness, or foreign matter, and ensure that the sealing performance is good.

Confirm that the raw materials to be mixed meet the requirements of the mixer and that the feeding amount does not exceed the specified capacity.

During Operation:

Start the mixer according to the specified sequence, and avoid sudden high-speed operation.

Monitor the operating status of the equipment at any time, including abnormal sounds, vibrations, or overheating of components. If any anomalies are found, stop the machine immediately and troubleshoot.

Do not open the mixer cover or touch the rotating parts during operation to prevent safety accidents.

For mixers with a cooling or heating system, ensure that the auxiliary system is operating normally and the temperature is within the specified range.

 

After Stopping:

After the mixer stops, wait for all rotating parts to come to a complete halt before carrying out maintenance, cleaning, or inspection work.

Clean the residual materials in the mixer tank and agitator in a timely manner to prevent material accumulation and hardening, which may affect the next use.

Check the wear status of vulnerable parts (such as seals, bearings, and blades) and replace them in a timely manner if necessary.

Safety and Maintenance:

Non-professionals are prohibited from modifying or repairing the mixer to avoid equipment damage or personal injury.

Regularly lubricate the transmission parts and conduct comprehensive maintenance according to the equipment maintenance manual to ensure the service life and stable operation of the mixer.

Send Inquiry