News

The Lubrication Cycle Of The Mixing Shaft Of A Twin - Shaft Mixer Varies Depending On Multiple Factors

May 04, 2025 Leave a message

Operating Environment

Dusty Environments

If the mixer operates in a dusty environment, such as in a cement factory or near a sand and gravel yard, dust can easily penetrate the bearing and other lubricated parts. This accelerates the contamination of the lubricating grease. In such cases, the lubrication cycle may need to be shortened to once a week or even less frequently.

Clean Environments

When the mixer is in a clean operating environment, the lubrication cycle can be extended appropriately. It may be possible to lubricate every 2 - 3 weeks.

 Operating Intensity

High - intensity Operations

For mixers with long - term continuous operation, frequent start - stops, or those handling high - viscosity materials, the mixing shaft is subjected to greater pressure and friction. Under these circumstances, the lubricant is consumed more quickly. The lubrication cycle might be around 1 - 2 weeks.

Low - intensity Operations

If the mixer has a relatively low - intensity workload, the lubrication cycle can be extended to 2 - 4 weeks.

 Lubrication Method and Lubricant Quality

Advanced Lubrication Systems and High - quality Lubricants

When an automatic lubrication system is used, combined with high - quality lubricating greases that have excellent wear - resistance and oxidation - resistance properties, a good lubrication state can be maintained for a longer time. In this case, the lubrication cycle can be extended to 3 - 4 weeks.

Basic Lubrication Methods and Ordinary Lubricants

With a basic manual lubrication method and ordinary - quality lubricants, the lubrication may need to be carried out approximately every 2 weeks.

How To Deal With The Jammed Discharge Door Of A Twin - Shaft Mixer

Send Inquiry