News

Working Principle And Precautions Of Twin-shaft Concrete Mixer

Jan 11, 2025 Leave a message

The double-shaft multifunctional strong dispersing mixer is a product with strong dispersing and stirring functions developed on the basis of the hydraulic lifting single-shaft mixer. It is divided into independent double-shaft and concentric double-shaft according to whether the double-shaft is concentric. The product has good adaptability to medium and high viscosity and thixotropic materials, and a variety of stirring methods are optional, such as conventional anchor type, butterfly type, frame type, etc. Dispersing and stirring can be carried out at the same time, with strong adaptability, and can be customized according to the characteristics of the customer's materials and production process requirements. Excellent technology and equipment.
Double-shaft gravity-free mixer is widely used in the drying and mixing of dry mortar, chemicals, pesticides, detergents, pigments, food, monosodium glutamate, milk powder, salt, feed, chemicals, ceramics, plastics, rubber additives and other powders.
Working Principle of Double-Shaft Zero-Gravity Mixer Double-shaft zero-gravity mixer is equipped with double-shaft rotating reverse blades in the horizontal cylinder. The blades are at a certain angle to stir the materials axially and radially, so that the materials are quickly mixed and evenly mixed. In order to reduce the replacement cost of the equipment's wearing parts, the paddle blades can be made into two pieces, and a removable small blade is placed on the blade base. The worn small blades can be directly replaced, which is economical and fast. The discharge form is generally a pneumatic (manual) flap valve. The arc valve is tightly embedded in the cylinder and flush with the inner wall of the cylinder. There is no material accumulation and mixing dead corner phenomenon. The standard type has large opening and small opening. The large opening opens to the edge of the cylinder, and the discharge is clean and fast, with less residue. Performance characteristics of double-shaft zero-gravity mixer The rotation speed of the reducer-driven shaft and the structure of the paddle blades will weaken the gravity of the material. With the lack of gravity, the differences in particle size and specific gravity of the materials are ignored during the mixing process. The intense stirring movement shortens the time of a mixing, which is faster and more efficient. Even if the materials have differences in specific gravity and particle size, they can achieve a good mixing effect under the rapid and violent tumbling and throwing of the staggered mixing blades.
The double spiral blade shaft design of the twin-shaft mixer fully utilizes the cylinder space, the mixing energy of the blades is released more completely, and the movement of the materials is more sufficient. Therefore, compared with the single-shaft mixer, the twin-shaft mixer has a shorter mixing time, more uniform mixing effect, and higher efficiency.
Another feature of the twin-shaft concrete mixer is the small amount of wear. This is because the twin-shaft structure of the twin-shaft mixer allows a large amount of material to be concentrated between the two mixing shafts, and the wear between the mixing arms, blades and bottom linings is relatively reduced, especially the blades in the main mixing area are slightly worn, which can save a lot of operating costs.
Structure and working principle: The twin-shaft mixer produced by our company adopts carburizing and straightening for the twin shafts; the frame is the supporting part of the entire equipment, which is welded by channel steel; the mixing device is composed of mixing arms and mixing blades, adopts a hoop type, and is integrated with the mixing shaft; the lining is made of manganese steel.
Working principle: the reducer drives the stirring shaft to rotate in one direction through the gears, and the stirring blades on the stirring shaft stir the materials. Due to the effect of the spiral angle, the shovel blade pushes the materials in the barrel from one side to the other side and then pushes them back to the original position in a cycle, so that the materials are fully stirred, thereby obtaining a more ideal stirring effect.

Send Inquiry