News

Honeycomb phenomenon The concrete structure is partially loose, with less mortar, more gravel, and gaps between the gravel, similar to honeycomb ho...

Cleaning Work Cleaning Internal Materials : Before shutting down the machine, drain all the materials in the mixer. Then add an appropriate amount ...

Cleaning the Equipment After the equipment stops running, cut off the power supply in a timely manner. Then, use a clean rag or broom to clean the ...

Adjustment Based on Material Characteristics Hardness and Granularity High - hardness and large - particle materials: When mixing materials with a ...

High mixing efficiency Fast mixing speed: The two mixing shafts of the twin-shaft mixer rotate in opposite directions, driving the mixing blades to...

Concrete mixing plants may have various faults due to various reasons during long-term operation. These problems will not only delay the project sc...

As an important special equipment for producing concrete, concrete mixing plant plays an indispensable role in many industries. Its application sco...

There are mechanical principles such as mutual proportions and upper and lower differences between machines. Reasonable mechanical principles are t...

The maintenance of the concrete mixing plant is directly related to the life and production quality of the mixing plant. The mixing plant is compos...

When planning a ready-mixed concrete mixing station site, the following aspects should be considered: - 1 - Raw material factors: A ready-mixed con...

1. According to the production capacity of the commercial concrete mixing station and the distance, route and road conditions of the finished produ...

First of all, the most serious and most concerned issue in the mixing station is the control of production dust. Powdered particle pollution is ver...